I thought I posted this here but was reminded that I did not. There are 6 spots left so as soon as they are filled, payments will be accepted. We were at 30 but requests for more were made so here we go with 40.
*We only need 30* people for this Buy-In.
*Available in 17mm, 19mm and 22mm BUT THIS BUY IN IS FOR 19MM BARS!
*ALL bars are Adjustable and include: new brackets, reinforcement plates, poly bushings (black), and 4cc tube of synthetic grease
*Does NOT include endlinks. If you have a DOHC, you are set. If you have a SOHC, you will need endlinks. I am working to see how I can get endlinks to those who need them for cheap
*Would be about 4 weeks before they are completed (Actually less but will leave this as a guide)
*These bars would be Progress' 'standard' charcoal powdercoat...any other color would be extra $$$
*50% deposit up front for ALL bars to get everything started, then rest due upon completion
*The FINAL price of these bars will be $140 SHIPPED
As stated above, we'll need a 50% deposit and all 30 people would have to pay for at least half the price of the bar up-front or all if preferred. The other half due is remainder of cost of the bar and shipping. I will not take any payments until I have 30 people.
Post up questions, comments and everything else.
Here are the people interested as of 10/20/09. If you are on this list and NOT still interested, post here or PM me:
29. anti-rice 01sl2
All payments will again be sent to me at: email@example.com This is because I am the business contact and Progress will deal with 1 person, not 39 asking where the bars are. The turnaround time after Progress receives the deposit is only 4 weeks. Probably less. If you are interested, take up one of these 6 spots! By the way, you guys/gals are in Canada and I will keep the declared value low so you guys don't get stomped on your end.